Attaching The D2 Lockbox Cover - Enterasys D2G124-12 Hardware Installation Manual

Mounting the Switch
Figure 2-22
1 Cover locking tabs
2 Latch and lock assembly (locking position)
1. Secure the cover over the top of the lockbox assembly by locking the mounting tabs over the
lip in the side of the mounting tray.
2. Slide the latch on the lock assembly to the position shown until it clicks into place.
3. Lock the lockbox by turning the provided key in the lock counter‐clockwise.
4. Insert the three cover screws (provided) in the positions shown and tighten securely.
5. Return the lockbox key to a secure location.
2-24 Installation

Attaching the D2 Lockbox Cover

3 Cover fastening screws (three)