Operating
Manual
Clamp Placement & Tool Positioning
Buckle location is critical to clamp performance. Use the following guidelines as a reference.
•
On large oval shapes locate buckle on smaller
radius.
•
Avoid installing buckles on flat surfaces.
•
On rectangular shaped parts, locate buckle at corner with tool approaching
object.
•
Do not bring tool up to stop for positioning. A stop will not allow proper tool rotation
during tension and cutoff resulting in a loss of clamp performance
For specific questions contact BAND-IT-IDEX Customer Service at 1-800-525-0758 or
303-320-4555 for more information.
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 17 of 36
IT1000-C / IT2000-C
1/4" IT Tool
Document # P49050 Rev. C
© Copyright
BAND-IT-IDEX, Inc. 2015
All rights reserved