Advertisement
Operating
Manual
Production tools will experience wear of specific parts. High cycle tools may experience a
component failure that is not considered a wear part. Preventative maintenance, including
regular cleaning and lubrication will reduce the replacement frequency of these parts. Threaded
fasteners may be replaced by off the shelf parts, but they must be an identical replacement or
tool function may be affected.
Part #
I51029
I51039
I51081
I51086
I51066
I40087
I51064
M24187
I14387
Please have both the tool model and serial numbers available when calling the factory for
service or assistance. Contact BAND-IT-IDEX Customer Service at 1-800-525-0758 or
303-320-4555 for more information. Part numbers are subject to change.
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Maintenance: Replacement Parts
Description
IT1000-C Cutter Blade Kit (pg. 31)
IT2000-C Cutter Blade Kit (pg. 31)
IT1000-C Knife (pg. 33)
IT2000-C Knife (pg. 33)
Tension Block Assembly: includes tension block, tension gripper,
tension pin, and 2 springs (pg. 30)
Hanger bracket; for attaching tool balancer (pg. 7 & 21)
Front gripper ball (pg.31)
Front cutoff lever (pg.32)
Head pin (pg.32)
Socket head cap screws M5 x 10mm; for balancer bracket & cover plate
Lubricant, Chevron Rykotac Grease EP (or equivalent)
Several fasteners require Loctite, Blue - Medium strength.
www.BAND-IT-IDEX.com
Page 28 of 36
IT1000-C / IT2000-C
1/4" IT Tool
Document # P49050 Rev. C
© Copyright
BAND-IT-IDEX, Inc. 2015
All rights reserved
Advertisement
