Advertisement
Operating
Manual
• The dimple clip provides a full depth punch during a the cutoff cycle. The dimple
clip also helps to reduce the occurrence of undetectable loose ties. The presence
of the punch provides a positive visual indicator to identify good vs. bad tie
installation.
• Tool orientation is critical to proper function. The tool must be aligned so the clip is
contacting the work piece while the clamp is being tensioned in order to make sure
the buckle locates inside clip during assembly.
• If the buckle slides under the clip, the dimple lock may not form and the tie may be
loose.
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Dimple Clip Guide (IT1000 only)
Incorrect alignment results in shallow dimple & excess tail
www.BAND-IT-IDEX.com
Page 18 of 36
IT1000-C / IT2000-C
1/4" IT Tool
Document # P49050 Rev. C
© Copyright
BAND-IT-IDEX, Inc. 2015
All rights reserved
Advertisement
