Advertisement
Operating
Manual
Environmental operating conditions are defined as:
•
For Indoor Use ONLY
•
Temperature range from 5°C to 38°C
•
Max relative humidity 80% for temperatures up to 31°C. Allowable humidity then
decreases linearly to 50% at 38°C
• Storage Temperature range from 5°C to 38°C
• Conforms to Applicable Rated POLLUTION DEGREE 1
• Correct illumination for safety of operator (ISO 8995-89)
• This tool has been tested for
Altitude: Sea level to 5690 ft (1730 m);
Atmospheric pressure: 14.7 lbs/in
• Tool size: 8.5" x 7" x 6" (216 x 178 x 152 mm) ; Tool weight: 5 lbs (2.3kg)
Additional Safety Guidelines:
• Read this manual and become familiar with the tool before installing any clamps.
• Protective eyewear should be worn when connecting and disconnecting the tool to
compressed air sources and during operation.
• Wear appropriate gloves for handling steel while operating this tool, applying steel
clamps and removing scrap clamp tail.
• Clamp tensioning can be immediately stopped by releasing the tool trigger. If a remote
trigger is used, the system must be connected to allow for immediate disabling of the tool.
• When applying clamps, care should be taken to insure fingers and loose clothing are not
in the way of the clamp being applied.
• Never attempt to clamp objects which have a potential to burst, shatter or otherwise
cause bodily harm.
• Disconnect air supply and electrical power prior to maintenance and disassembly of tool
components.
• Liquids or lubricants should never be put into the air lines.
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Safety Guidelines
2
2
(1 Kg/cm
) to 12 lbs/in
www.BAND-IT-IDEX.com
Page 4 of 36
IT1000-C / IT2000-C
1/4" IT Tool
2
2
(0.85 Kg/cm
)
Document # P49050 Rev. C
BAND-IT-IDEX, Inc. 2015
All rights reserved
© Copyright
Advertisement
