Advertisement
Operating
Manual
For proper performance the air control module must be mounted and operated in a horizontal
position as shown on the previous page. Below is the layout for the mounting hole locations
dimensioned in inches.
Hole layout for mounting to a wall
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Regulator Mounting Holes
www.BAND-IT-IDEX.com
Page 11 of 36
IT1000-C / IT2000-C
Hole layout for mounting to a bench
1/4" IT Tool
Document # P49050 Rev. C
© Copyright
BAND-IT-IDEX, Inc. 2015
All rights reserved
Advertisement
