Parts List - Band-it UL4000-D Operating Instructions Manual

Notes:
Apply Item 31 (Super Lube) to:
Item 4 (Cut-off Cam)
Item 3 (Cutter Knife) at contact
point with item 1 (Tool Head)
Item 26 (Spring) before installation
Apply Item 32 (Grease) to:
Item 7 (Tension Screw) threads
and grooved end
Item 2 (Cutter Blade) counter-bore
only, after item 14 (Bearing Tip)
has been installed.
Tighten the following:
Item 23 (#10-32 Screws)
to 60 – 70 in-lbs.
Item 22 (1/4-28 Screws)
to 90 – 110 in-lbs.
Adjust Item 24 (Plunger) for
positive detent action when
item 6 (Handle) is actuated.
* Permatex P/N: 82325 or Equivalent
Tool Accessories:
UL4199 – UL Safety Strap: 15 lb capacity tool lanyard with single stainless carabineer.
BAND-IT IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-0307 USA
P: 1-800-525-0758
F: 1-800-624-3925

Parts List

Item Part Number
1 M00587
2 M09787
3 M08687
4 M08987
5 M09087
6 UL1219
7 M00987
8 M08887
9 M01787
10 M09187
11 M02387
12 M00287
13 M01388
14 M05387
15 M06587
16 M02287
17 M04387
18 M07387
19 M07487
20 M07587
21 M05787
22 J67287
23 M06187
24 M02487
25 A33887
26 A53587
27 M01487
28 M08187
29 M08087
30 M07987
31 I16387*
32 C23199
33 M09887
34 M09387
35 UL4001
OSHA: 192.45 (h)(1) – Falling object protection
www.BAND-IT-IDEX.com
7
ULTRA-LOK® TOOL
Qty Description
1 Tool Head, Fin. UL
1 Cutter Blade, UL
1 Cutter Knife, UL
1 Cam, Cut-off, UL
1 Tension Block, Mach., UL
Handle Assembly:
1
Includes Handle, Handle Grip, and Pins
1 Tension Screw, Fin.
1 Gripper, UL
1 Plate, Back, Cast/Fin.
1 Gripper Guide, UL
1 Plate, Release, cast/fin.
1 Roller, Cut-off, Fin.
2 Pin, .187 Dia X 1.50 Long, Fin.
1 Bearing Tip, Fin.
Ball, ¼" Diameter
1
1 Tip, Load Bearing, Fin.
1 Tripper Bracket, Cast/Fin.
1 Body, Left, Finished, UL
1 Body, Right, Finished, UL
2 Wear Plate, Fin.
Screw, Socket Head Cap, ¼ X 1"
2
Screw, Socket Head Cap, ¼ X ½"
4
Screw, Socket Head Cap, #10-32 X 3/8"
6
2 Screw, Spring Plunger, ¼-20
1 Spring, Compression, .180 X .813 Long
2 Spring, Compression, .300 X 1.00 Long
1 Pin, Dowel, ¼ Dia X 1.50 Long
4 Washer, .128 ID X .238 OD
4 Rivet, Blind, .125 X .328 Long
2 Threaded Insert, #10-32
- Lubricant, Super Lube w/ Teflon
- Lubricant, Moly, Syringe
Shear Plate, ¾", UL
1
Shear Plate, UL, ½"
1
1 Adapter and Clutch Assembly
Document # P09986 Rev. B
UL4000-D
(Optional)
© Copyright
BAND-IT IDEX, Inc. 2016
All Rights Reserved