C-TEC CAST XFP Engineering Manual page 36

CAST XFP 32 ZONE ANALOGUE ADDRESSABLE FIRE ALARM PANEL
ENABLE/DISABLE SOUNDERS
Note: The disablement of individual sounder groups is non-compliant with EN54-2.
Note: Changes made to the CONFIGURE SOUNDER DISABLEMENTS function, see page 33, will have an
affect on the options available at this menu.
This function allows you to disable one or more sounder groups from sounding in a fire condition.
Enter AL3 (4444) > Engineer Functions > Set/Clear Disablements > Enable/Disable Sounders.
When selected, press the Accept
Sounder Group: All
Select the sounder group (1 to 16 or ALL) to be disabled/enabled using the
When the desired sounder group has been selected, press the Accept
group's status (Enabled or Disabled) will flash. Next, press the
between enabled and disabled and press the Accept
the next sounder group allowing further enablements or disablements to be made. Alternatively, to
return to the previous menu press the Escape
ENABLE/DISABLE OUTPUTS
This function allows you to disable one or more output sets from activating in a fire condition. It is
typically used to disable, for example, auto-diallers to monitoring stations, roller shutter doors, etc.
from activating during routine maintenance.
Enter AL3 (4444) > Engineer Functions > Set/Clear Disablements > Enable/Disable Outputs.
When selected, press the Accept
Output Set: All
Select the output set (1 to 16 or ALL) to be disabled/enabled using the
When the desired output set has been selected, press the Accept
(Enabled or Disabled) will flash. Next, press the
and disabled and press the Accept
set allowing further enablements or disablements to be made. Alternatively, to return to the previous
menu press the Escape
ENABLE/DISABLE RELAYS
This function allows the disablement of one or more of the panel's 3 auxiliary relays from activating as
programmed.
Enter AL3 (4444) > Engineer Functions > Set/Clear Disablements > Enable/Disable Relays.
When selected, press the Accept
Panel Relay : 1
Select the relay (1, 2 or 3) to be disabled/enabled using the
When the desired output set has been selected, press the Accept
(Enabled or Disabled) will flash. Next, press the
and disabled and press the Accept
allowing further enablements or disablements to be made. Alternatively, to return to the previous
menu press the Escape
ENGINEERING MANUAL • Approved Document No. DFU5010020 Rev 4 • Page 36 of 48
4
button and windows similar to the ones below will appear:
4
button and windows similar to the ones below will appear:
4
button to select. The window will now move to the next output
3
button.
4
button and windows similar to the ones below will appear:
4
button to select. The window will now move to the next relay
3
button.
Sounder Group: All
Enabled
5
4
button to select. The window will now move to
3
button.
Output Set: All
Enabled
4
5 6
and scroll buttons to toggle between enabled
Panel Relay : 1
Enabled
5 6
and
5 6
and scroll buttons to toggle between enabled
5 6
and scroll buttons.
4
button and the sounder
6
and scroll buttons to toggle
5 6
and scroll buttons.
button and the output set's status
scroll buttons.
4
button and the relay's status