Network Stack Configuration - Contec IPC Series User Manual

◆Network Stack Configuration

Configure settings associated with the CSM (Compatibility Support Module), such as Option ROM
execution.
Figure 4.11. Network Stack Configuration
Table 4.11. Network Stack Configuration
Field Name
Default Value
Possible Value
Help
Field Name
Default Value [Disabled]
Possible Value
Help
Field Name
Default Value [Disabled]
Possible Value
PT-S2000HX/HXC/LX/LXC Series User's Manual
Network stack
[Disabled]
Disabled (Restore non-Windows 8 Default)
Enabled
Enable/Disable UEFI Network stack
Ipv4 PXE Support
Disabled
Enabled
Enable Ipv4 PXE Boot Support. If disabled IPV4 PXE boot option will
not be created.
Ipv6 PXE Support
Disabled
Enabled
49