Installing The Mini Card - Contec IPC Series User Manual

◆Installing the mini card

To install the modules, locate the mini card slot on the PCB and perform the following steps:
(1) Remove the four screws lift from the PC box out of the PT-S2000HX/HXC/LX/LXC.
1
Figure 3.9. Remove back cover
(2) Align the contact edge of the mini card with the corresponding socket contact of the computer
PCB.
(3) Pivot the card until you can snap it into place by pressing the upper side of the connector and secure
the card with the screw. (Standoff NUT 1)
2
Figure 3.10. Fix the mini card
26
3
PT-S2000HX/HXC/LX/LXC Series User's Manual
locate the mini
card slot on the
board