Removing Expansion Card From The Expansion Card Riser - Dell EMC PowerEdge R650xs Installation And Service Manual

Removing expansion card from the expansion card riser

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the air shroud.
4. Remove the expansion card
Steps
1. Pull and lift up the expansion card retention latch lock to open.
2. Hold the expansion card by its edges and pull the card until the card edge connector disengages from the expansion card
connector on the riser.
Figure 77. Removing an expansion card from the Riser 1
Safety instructions
Before working inside your system
risers.
on page 25.
on page 26.
Installing and removing system components 85