Installing The System Cover - Dell EMC PowerEdge R650xs Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge R650xs:
- Reference manual (25 pages) ,
- Installation and service manual (145 pages) ,
- Installation and service manual (145 pages)
Table of Contents
Advertisement
Figure 14. Removing the system cover
Next steps
Replace the system
cover.
Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
Safety instructions
on page 25.
2. Follow the procedure listed in
Before working inside your system
on page 26.
3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system.
2. Close the system cover release latch.
3. Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the lock clockwise to the lock position.
30
Installing and removing system components
Advertisement
Table of Contents
