Dell EMC PowerEdge R650xs Installation And Service Manual page 83

Figure 73. Installing the Riser 1
2. For Riser 2a, release the blue latch and holding the touch points, align the expansion card riser with the connector and the
riser guide pin on the system board. Lower the expansion card riser into place until the expansion card riser connector is fully
seated in the connector.
Figure 74. Installing the Riser 2a
3. For Riser 2b, re-connect the cable from the system board, then release the blue latch and holding the touch points, align
the expansion card riser with the connector and the riser guide pin on the system board. Lower the expansion card riser into
place until the expansion card riser connector is fully seated in the connector.
Installing and removing system components 83