Rear View Of The System - Dell EMC PowerEdge R650xs Installation And Service Manual

Rear view of the system

Figure 6. Rear view of the system
Table 6. Rear view of the system
Item Ports, panels, or slots
1 PCIe expansion card riser
1
2 BOSS riser
3 PCIe expansion card riser
2c
4 Power supply unit (PSU 1)
5
Power supply unit (PSU
2)
6 System identification
button
7
VGA port
8 OCP NIC port
9 USB 3.0 port
10 USB 2.0 port
Icon Description
N/A
Enables you to connect PCI Express expansion cards.
N/A
Enables you to connect BOSS card.
N/A
Enables you to connect PCI Express expansion cards.
Indicates the PSU.
Indicates the PSU.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
● If the system stops responding during POST, press and hold
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
Enables you to connect a display device to the system.
N/A This port supports OCP 3.0.
This port is USB 3.0-compliant.
This port is USB 2.0-compliant.
Dell EMC PowerEdge R650xs system overview 13