Installing The Serial Com Port - Dell EMC PowerEdge R650xs Installation And Service Manual

Figure 95. Removing the Serial COM port
3. Tighten the screws and install the PCIe blank on the expansion card riser.
Figure 96. Installing the PCIe blank
Next steps
Replace the serial COM port.

Installing the serial COM port

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Lift the expansion card riser
96 Installing and removing system components
Safety instructions
Before working inside your system
from the connector on the system board.
on page 25.
on page 26.