Cooling Fans; Removing A Cooling Fan - Dell EMC PowerEdge R650xs Installation And Service Manual

Figure 19. Installing the air shroud
Next steps
Follow the procedure listed in

Cooling fans

Removing a cooling fan

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the air shroud.
4. Move the cables out of way to access the fan cable connector on the system board.
NOTE: Observe the fan cable routing or make a note on the fan cable routing.
Steps
1. Disconnect the cooling fan cable connected to the fan dongle cable.
2. Holding the blue tab, lift the cooling fan out of the fan cage.
After working inside your system
Safety instructions
Before working inside your system
on page 26.
on page 25.
on page 26.
Installing and removing system components 35