Dell EMC PowerEdge R650xs Installation And Service Manual page 81

Figure 70. Removing the Riser 2a
3. For Riser 2b, first disconnect the cable from system board, then release the blue latch, and then holding the blue touch
points, lift the expansion card riser from the riser connector on the system board.
Figure 71. Removing the Riser 2b with SNAPI module
4. For Riser 2c, release the blue latch and hold the blue touch points, and lift the expansion card riser from the riser connector
on the system board.
Installing and removing system components 81