Taylor-Dunn B0-248-TT Operation, T Roubleshooting And Replacement Parts Manual page 53

Inspect the Service Brake ................. 2
Disc Brake Pads .................................................... 2
Disc Brake Rotor .................................................. 2
Inspect the Parking brake .................. 3
Adjust the Service Brakes ................. 3
Two or Four Wheel Hydraulic Disc Brakes ......... 3
Adjust the Parking Brake ................... 4
Wheel Park Brake ................................................. 4
Check Master Cylinder Fluid ............. 5
Bleed the Brake System .................... 6
Flush the Brake System .................... 7
Replace the Parking Brake Lining ...... 7
Wheel Park Brake ................................................. 7
Replace Front Disc Brake Pads ......... 8
Replace Rear Brake Pads or Shoes .. 9
Replace the Wheel Cylinder .............. 10
Disc Brake Body Assembly (front or rear) ........... 10
Repair the Brake Body ...................... 11
Replace the Master Cylinder ............. 13
Repair the Master Cylinder ................ 14
Brake fluid specifications:
Vehicles up to serial number 151284, were shipped
with DOT 5 brake fluid.
Starting with serial number 151285, vehicles were
shipped with DOT 3 brake fluid.
The brake system is compatible with DOT 3 or DOT
5 brake fluid, see Warning.
TABLE OF CONTENTS
•
•
•
•
•
Only use the specified brake fluid as
indicated to the left.
DOT 3 brake fluid is corrosive and will
damage paint finishes.
Do not mix brake fluids. If changing
brake fluid type, the entire system must
be flushed.
Dispose of brake fluid in accordance
with local state and federal regulations.
Read and follow all warnings on the
brake fluid container.