Table of Contents
Advertisement
Operation
Monitor/Status
The terminal interface SC 553 Monitor/Status function supports the display of four categories of
information:
• Alarm Status – available at all times
• EIA Status and Receive Level – available at all times
• TR54016 Current/Total Statistics – available only when the Network ESF Mode is configured for
TR-54016
• TR54016 Interval Statistics – available only when the Network ESF Mode is configured for TR-
54016
• ANSI T1.403 Statistics – available only when the Network ESF Mode is configured for ANSI
T1.403
When you select Monitor/Status from the Main Menu, the resulting screen, shown in
presents a menu with those five categories and a selection for resetting the TR54016 statistics.
[1] MONITOR ALARM STATUS
[2] MONITOR EIA STATUS / RECEIVE LEVEL
[3] MONITOR TR54016 CURRENT/TOTAL STATISTICS
[4] MONITOR TR54016 INTERVAL STATISTICS
[5] CLEAR TR54016 NEAR-END STATISTICS
[6] MONITOR ANSI T1.403 STATISTICS
[0] RETURN TO PREVIOUS MENU
Select: [ ]
Figure 3-18
Alarm Status Screen
The Alarm Status screen, shown in
alarm conditions. It displays the current status, INACTIVE or ACTIVE, of the alarm conditions
that the DSU can report. Definitions of the alarm conditions appear in Appendix C, Alarm
Definitions .
When you are done viewing the screen, type 0 to return to the Monitor/Status menu.
3-22
SC553 MONITOR / STATUS
Monitor/Status Menu Screen
Figure
SpectraComm 553 Fractional T1 DSU
Installation and Operation Manual
3-19, presents current status information concerning
Terminal Interface
Figure
3-18,
076R155-000
Issue 7
Advertisement
Table of Contents
