Table of Contents
Advertisement
Operation
Figure 3-4
Type 3 and press the Enter key. The screen then displays the Shelf Inventory screen that appears in
Figure
3-6.
The other selections in this menu all relate to SCM functionality. They are discussed in the
SpectraComm Manager Card Installation and Operation Manual, GDC Publication Number
048R303-000.
Telnet Connection via SCM Card
The SpectraComm Manager Card Installation and Operation Manual, GDC Publication Number
048R303-000 explains how to establish a Telnet connection to the SCM LAN port. When you do
so, the Telnet Connection Login screen shown in
Figure 3-5
After you enter the login password the screen displays the Shelf Inventory screen that appears in
Figure
3-6.
Note
There is a 10-minute timeout on the terminal interface. The DSU terminates the session if you allow 10
minutes to pass without pressing any key on the keyboard. If you are using a terminal connected to the
SCM front panel, a terminated session returns the display to the SCM Main Menu. If you are using a Tel-
net connection, the Telnet session is ended and a new one must be started.
076R155-000
Issue 7
Main Menu
1. IP Address
2. Security
3. Element Access
4. Test
Enter Selection:
SCM Main Menu Screen
Copyright (c) 1993-2000 General
DataComm Industries Inc.
All rights reserved
SCM Application Version 3.34A
login:
ø__
Telnet Connection Login Screen
SpectraComm 553 Fractional T1 DSU
Installation and Operation Manual
Terminal Interface
Figure 3-5
is the first to appear.
3-7
Advertisement
Table of Contents
