Table of Contents
Advertisement
3.8 Connecting an Extension Module
3.8
Connecting an Extension Module
Accessories
￭￭￭￭￭￭￭￭
26
CAUTION
The 940 Professional IC Vario has to be switched off when connect-
ing the Extension Module!
For this step you need the following accessories:
6.2156.060 cable Extension Module - Professional IC, 40 cm
￭
or
6.2456.070 cable Extension Module - Professional IC, 1 m (optional
￭
accessory)
The connection sockets are located on the rear of the instrument.
Connecting the Extension Module to the IC instrument
1 Plug the connecting cable (6.2156.060) into the In connection
socket on the Extension Module and tighten it in place.
2 Plug the other end of the connecting cable into the Extension
Module connection socket on the IC instrument and tighten it in
place.
Only one Extension Module can be connected directly to the IC instru-
ment. The second Extension Module has to be connected to the first and
the third to the second.
Connecting an Extension Module to another Extension
Module
1 Plug the connecting cable (6.2156.060) or the longer connecting
cable (6.2156.070) into the In connection socket on the second
Extension Module and tighten it in place.
2 Plug the other end of the connecting cable into the Out connection
socket on the first Extension Module and tighten it in place.
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
942 Extension Module Vario LQH (2.942.0070)
Advertisement
Table of Contents
