Setting Up The Instrument; Packaging; Checks; Location - Metrohm 942 Extension Module Vario LQH Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 10-port valve connection – Injection
valve on the IC instrument
9 Capillary to the container with transfer
solution
3.2

Setting up the instrument

3.2.1

Packaging

3.2.2

Checks

3.2.3

Location

3.3

Base tray and bottle holder

3.3.1

Basic information on base tray and bottle holder

942 Extension Module Vario LQH (2.942.0070)
The instrument is supplied in protective packaging together with the sepa-
rately packed accessories. Keep this packaging, as only this ensures safe
transportation of the instrument.
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation and free of vibrations and which provides protection against
corrosive atmosphere and contamination by chemicals.
The instrument should be protected against excessive temperature fluctua-
tions and direct sunlight.
The base tray (6.2061.110) and bottle holder (6.2061.100) protect IC
instruments from dust, dirt and leaking fluids. The supply bottles for eluent
and auxiliary solutions can be positioned neatly on the bottle holder.
In a complex IC system, several different instruments may be used, such as
an analyzer, an extension module and a detector. These instruments can
be set up in one or more stacks. We recommend that a base tray and bot-
tle holder be mounted for each stack of IC instruments.
The bottle holder and base tray must be removed or set up if one of the
following instruments is to be mounted on or under a 940 Professional IC
Vario:
One or more 942 Extension Module Vario
￭
Or another instrument with the same-sized footprint
￭
8 10-port valve connection – Any auxili-
ary solution and vessels
3 Installation
￭￭￭￭￭￭￭￭
11