Base - Skyjack SJ82 T Operation Manual

Visual and daily maintenance inspections
3

4.2-7 Base

Do the inspection that follows:
Turret transportation lock
1
Make sure the turret transportation lock is
▪
unlocked.
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
▪
Axles
2 3
Make sure the front
▪
are correctly attached.
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hose connections
▪
are tight.
Make sure there is no sign of hydraulic
▪
leakage.
Tie rod
4
Make sure there are no loose or missing parts.
▪
Make sure the tie rod end studs are attached
▪
and tight.
Make sure there is no visible damage.
▪
SJ82 T, SJ86 T
and rear drive axles
2 3
Section 4 – Inspections Before Operation
4
1
Oscillating cylinders
5
Make sure the oscillating cylinder assembly
▪
is correctly attached, and there are no visible
spaces.
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hose connections
▪
are tight.
Make sure there is no sign of hydraulic
▪
leakage.
NOTE
The oscillating axle is locked when the MEWP is
in the elevated travel position or at the elevated
travel speed.
5
2
213205AAA
43