Section 6 – Additional Procedures
6.6 Move the MEWP for
transport
When you drive a MEWP onto or remove it from a
transport vehicle, on a public road, give protection to
the person(s) involved. Protection can include:
Warning cones
▪
Road signs and signaling devices
▪
Applicable personal protective equipment, such
▪
as reflective clothing
Flag personnel to warn other vehicles of the
▪
MEWP and other related vehicles
Other applicable control measures.
▪
Obey all the national, state/provincial/territorial, and
local safety rules when you move the MEWP for
transport. Only qualified personnel with authorization
must drive the MEWP on to or remove it from a
transport vehicle.
Be sure the vehicle capacity and load equipment,
hoists, chains, straps, and other related items are
sufficient to withstand the maximum MEWP weight.
Park the transport vehicle on a level surface. Use
wheel chocks or blocks to prevent unintended vehicle
movement during this operation.
213205AAA
74
6.6-1 Lock the turret
1. Rotate the turret until the transportation lock
is in line over the of the lock points
chassis.
2. Lift and turn the lock pin
lock point on the chassis.
2
1
Figure 04 Turret transportation lock
Move the MEWP for transport
on the
3
and lower it into the
1
2
1
3
3
SJ82 T, SJ86 T
2