Table of Contents
Advertisement
Optional equipment and attachments
3.5 Optional equipment and
attachments
CAUTION
Skyjack approved modifications and attachments
can change the MEWP specifications. Refer to the
applicable instructions and labels.
IMPORTANT
Refer to the labels of the optional equipment for
the actual weight. Include this weight to calculate
the total load on the platform. Include personnel
and other materials in the total load.
The weight of the attached parts, panels,
occupants, and tools put together must not be
more than the rated platform capacity.
NOTE
Refer to the website (www.skyjack.com) for other
optional equipment.
3.5-1 Flashing amber light
The flashing amber light is on top of the turret of the
MEWP .
7
Flashing amber light: This light flashes when
1
you operate a boom function. It operates with the
motion alarm.
SJ82 T, SJ86 T
3.5-2 Welder
The welder is installed on the platform. Refer to the
welder operation manual for the correct operation and
maintenance.
7
Welder: This equipment is connected to the
1
welder AC socket on the platform.
7
Welder AC socket: This AC socket is for the
2
welder.
NOTE
In temperatures below 0°C (32°F), make the
hydraulic oil warm before you operate the welder.
WARNING
1
Only a qualified service technician must install,
operate, do maintenance on, and repair the welder.
CAUTION
If you breathe in welding fumes and gases, it can
be hazardous to your health.
Section 3 – Familiarization
1
2
213205AAA
33
Advertisement
Table of Contents
