Rotate The Platform With The Base Control Console; Rotate The Turret With The Base Control Console; Move The Jib Up And Down With The Base Control Console (Optional Equipment); Raise Or Lower The Main Boom With The Base Control Console - Skyjack SJ82 T Operation Manual

Rotate the platform with the base control console

5.2 Rotate the platform with
the base control console
1. Move and hold the start/function enable/
emergency power switch to the function enable
position.
2. Move the platform rotation switch to the left or
right. Release the switch to stop.
5.3 Rotate the turret with the
base control console
WARNING
Before you rotate the turret, make sure there
are no personnel or obstructions in the path of
rotation, which includes blind spots. If you do not
obey, there is a risk of death or serious injury.
1. Move and hold the start/function enable/
emergency power switch to the function enable
position.
2. Move the turret rotation switch to the left
or right to rotate the turret clockwise or
counterclockwise. Release the switch to stop.
NOTE
The turret can be rotated 360 degrees
continuously.
5.4 Move the jib up and
down with the base
control console (optional
equipment)
1. Move and hold the start/function enable/
emergency power switch to the function enable
position.
2. Move the jib up/down switch to the up or down
position. Release the switch to stop.
SJ82 T, SJ86 T
5.5 Raise or lower the main
boom with the base
control console
IMPORTANT
The maximum platform capacity changes with the
boom position. The indicator lights on the base
and platform control consoles show if the platform
is in the high or low capacity zone.
1. Move and hold the start/function enable/
emergency power switch to the function enable
position.
2. Move the main boom raise/lower switch to the
raise or lower position. Release the switch to
stop.
5.6 Extend or retract the boom
with the base control
console
IMPORTANT
The platform capacity changes with the boom
position and/or capacity derate switch position.
The indicator lights on the base and platform
control consoles show if the platform is in the high
or low capacity zone.
1. Move and hold the start/function enable/
emergency power switch to the function enable
position.
2. Move the boom extend/retract switch to the
extend or retract position. Release the switch to
stop.
Section 5 – Operation
213205AAA
63