Tension Adjustment - Siemens MOBILETT Plus Service Instructions Manual

Motor drive units
A
Fig. 4

Tension adjustment

•
Loosen the screws (A/Fig. 4). The tension of the transmission belt can then be adjusted
with a 13 mm wrench.
•
Press the special adjustment device to the transmission belt and hold a finger on top of it.
When the button (C/Fig. 5) is in the same level as the top of the adjustment device a
proper pressure is applied.
Siemens-Elema AB
Solna, Sweden
1 - 1.5 mm
SPR8-215.898.01
Rev. 05
Fig. 5
Page 3 of 6
01.02 SPS-UD
11 - 3
C
11
MOBILETT Plus / - E/ - M