Adjustment And Replacement Of The Turn Plate - Siemens MOBILETT Plus Service Instructions Manual

Mechanical systems
MOBILETT Plus and Plus M only

Adjustment and replacement of the turn plate

DANGER
Equipment required: 2 pieces of wood (50 x 70 x 500 mm)
•
The turn plate mechanism must be removed for adjustment or replacement.
•
Ensure compliance with the safety information in the section:
"Safety information and protective measures".
Siemens-Elema AB
Solna, Sweden
Never work with the system open if the capacitor is charging or
has just been charged.
The capacitor bank may still be charged even if the system is
switched OFF and the mains cable is disconnected.
Life-threatening electric shock hazard exists.
See Chap.:
"Protective measures when working on the capacitor bank".
SPR8-215.898.01
Rev. 05
Page 11 of 28
01.02 SPS-UD
10 - 11
10
MOBILETT Plus / - E/ - M