Siemens MOBILETT Plus Service Instructions Manual page 69

Miscellaneous
Fig. 6
•
Clean cable winder box.
•
Remove plug, cable stop and ring (pos. 4 / Fig. 4).
If cable winder has to be replaced:
•
go to "B".
If mains cable has to be replaced:
•
Remove four screws (pos. 3 / Fig. 5).
•
Remove connection plate and disconnect the mains cable (pos. 1 / Fig. 6).
•
Install new mains cable and connection plate.
NOTE
"B"
•
Reinstall ring, cable stop and plug.
•
Reinstall cable winder.
•
Reinstall the securing screw (pos. 1 / Fig. 7).
Siemens-Elema AB
Solna, Sweden
1
Wind the mains cable to the cable winder without any play.
SPR8-215.898.01
Rev. 05
MOB00622
Fig. 7
Page 5 of 6
01.02 SPS-UD
8 - 5
1
MOBILETT Plus/ - E/ - M