Siemens MOBILETT Plus Service Instructions Manual page 83

Mechanical systems
Fig. 7
Movement of the fork
If the fork does not hold its position, it must be adjusted (Fig. 7).
•
Loosen the screw completely.
•
Retighten the screw until there is no play.
•
Tighten the screw until the fork holds its position.
Movement of the single tank
If the single tank rotates too easily or does not hold its position in the fork:
•
Remove the caps on the fork.
•
Tighten or loosen the friction adjustment (one on each side of the fork) (Fig. 8)
Siemens-Elema AB
Solna, Sweden
Fig. 8
SPR8-215.898.01
Rev. 05 01.02
Page 5 of 28 MOBILETT Plus / - E/ - M
SPS-UD
10 - 5