Replacing The Motor Unit - Siemens MOBILETT Plus Service Instructions Manual

Motor drive units
Battery
Battery indicator
Motor control
buttons
Fig. 7 Motor power unit, electrical connections
Fig. 8 Removing wheel and motor

Replacing the motor unit

Equipment required: Ratchet with Allen socket
•
Remove the side and front covers.
•
Remove the motor drive unit or battery pack depending on the side where the motor is
being replaced. Refer to (Fig. 7) for electrical connections.
•
Tilt the unit and support the affected side with a block of wood.
Siemens-Elema AB
Solna, Sweden
SPR8-215.898.01
Rev. 05 01.02
Power supply
Right motor
Left motor
Page 5 of 6 MOBILETT Plus / - E/ - M
SPS-UD
11 - 5
11