Siemens MOBILETT Plus Service Instructions Manual page 104

10 - 26
Adjustment
screw
Fig. 29
•
Loosen the adjustment screw so that the arm is no longer balanced, however the spring
mechanism remains in position (Fig. 29). Do not allow the spring mechanism to fall out.
•
Remove the screw and washer from the upper counter bearing (Fig. 30).
•
Remove the friction linings.
MOBILETT Plus / - E/ - M
!
Fig. 30
SPR8-215.898.01
Rev. 05 01.02
Mechanical systems
Page 26 of 28 Siemens-Elema AB
SPS-UD Solna, Sweden