Installing The Sim Card; Mounting Location Information - Sierra Wireless AirLink LS300 User Manual

Hide thumbs Also See for AirLink LS300:
Table of Contents

Advertisement

Rev 4 Apr. 13

Installing the SIM Card

If your mobile network operator requires it, insert a SIM card into the device
before installation or connecting any external equipment or power to the device.
To install the SIM card:
1. Remove the SIM card cover.
When viewed from the top, the notched corner of the SIM card faces towards
the center of the device as shown in
Note the direction of notched corner for proper SIM card alignment
Figure 2-5: SIM Card Installation
2. Gently slide the card into the slot in the connector until it stops.
3. Replace the SIM card cover.

Mounting Location Information

Warning:
This device is not intended for use close to the human body. Antennas should
be at least 8 inches (20 cm) away from the operator.
Mount the device where:
There is easy
access to the cables
Cables are not bent, constricted, close to high amperages or exposed to
extreme temperatures
The front panel LEDs are easily visible
There is adequate airflow
Installation and Startup
Figure
2-5.
19

Advertisement

Table of Contents
loading

Table of Contents