Defining The Type And Location Of A Ppp Interface; Setting Up A Ppp Service Profile - Cabletron Systems SMARTSWITCH ROUTER 9032578-05 User's Reference Manual

Chapter 25: WAN Configuration Guide
WAN interfaces, then apply a service profile to the desired interface(s). Examples of this
process are displayed in

Defining the Type and Location of a PPP Interface

To configure a PPP WAN port, you need to first define the type and location of one or
more PPP WAN ports on your SSR. The following command line displays a simplified
example of a PPP WAN port definition:
Define the type and location of
a PPP WAN port.
If the port is an HSSI port that will be connected to a HSSI port on another router, you can
specify clock <clock-source> in the definition. (This feature is supported on HSSI boards,
part number SSR-HSSI-02-AA.)

Setting up a PPP Service Profile

Once you have defined the type and location of your PPP WAN interface(s), you can
configure your SSR to more efficiently utilize available bandwidth for PPP
communications.
Note: The SSR comes with a set of "default values" for PPP interface configuration
settings, which means that setting up a PPP service profile is not absolutely
necessary to begin sending and receiving PPP traffic on your SSR.
After you configure one or more service profiles for your PPP interface(s), you can then
apply a service profile to active PPP WAN ports, specifying their behavior when handling
PPP traffic. The following command line displays all of the possible attributes used to
define a PPP service profile:
Define a PPP
service profile.
346
"PPP Port Configuration" on page
port set
<number>
ppp define service
enable|disable ip enable|disable ipx
enable|disable] [high-priority-queue-depth
<number>
] [lcp-echo on|off] [lcp-magic on|off]
[low-priority-queue-depth
<number>
] [max-failure
<number>
] [med-priority-queue-depth
on|off] [red-maxTh-high-prio-traffic
[red-maxTh-low-prio-traffic
med-prio-traffic
<number>
traffic
<number>
] [red-minTh-med-prio-traffic
[retry-interval
348.
<port>
wan-encapsulation ppp speed
<service name>
[bridging
<number>
<number>
] [max-terminate
<number>
<number>
] [red-minTh-high-prio-
] [red-minTh-low-prio-traffic
<number>
] [rmon on|off]
SmartSwitch Router User Reference Manual
] [max-configure
<number>
] [red
<number>
]
] [red-maxTh-
<number>
]