Monitoring The Lfap Agent On The Ssr - Cabletron Systems SMARTSWITCH ROUTER 9032578-05 User's Reference Manual

Chapter 24: LFAP Configuration Guide

Monitoring the LFAP Agent on the SSR

The lfap show commands display information about the configuration of the LFAP agent
on the SSR and its current status. Use the following commands in Enable mode to view
LFAP agent information:
Command
lfap show configuration
lfap show servers
lfap show statistics
lfap show status
lfap show all
332
Displays
Configuration of the LFAP agent on the SSR.
Configured FAS system(s) to which the LFAP agent
could connect.
Statistics collected by the LFAP agent.
Server to which the LFAP agent is currently connected
and the current status of the LFAP agent.
All of the above information.
SmartSwitch Router User Reference Manual