Table of Contents
Advertisement
Chapter 18: IPX Routing Configuration Guide
Configuring IPX Interfaces and Parameters
This section provides an overview of configuring various IPX parameters and setting up
IPX interfaces.
Configuring IPX Addresses to Ports
You can configure one IPX interface directly to a physical port.
To configure an IPX interface to a port, enter the following command in Configure mode:
Configure an IPX interface to a
physical port.
Configuring Secondary Addresses on an IPX Interface
You can configure secondary addresses on an IPX interface.
To configure a secondary address on an IPX interface, enter the following command in
Configure mode:
Add a secondary address and
encapsulation type to an
existing IPX interface.
Note:
Configuring a secondary address on an IPX interface requires updated SSR
hardware. Please refer to
Configuring IPX Interfaces for a VLAN
You can configure one IPX interface per VLAN.
To configure a VLAN with an IPX interface, enter the following command in Configure
mode:
Create an IPX interface for a
VLAN.
252
interface create ipx
<ipxAddr-mask>
mask
interface add ipx
<IPX-network-address>
encapsulation
Appendix A
for details.
interface create ipx
address-mask
SmartSwitch Router User Reference Manual
<InterfaceName>
address-
<port>
port
<Interface Name>
address
output-mac-
<encapsulation-type>
<InterfaceName>
<ipxAddr-mask>
vlan
<name>
Advertisement
Table of Contents
Need help?
Do you have a question about the SMARTSWITCH ROUTER 9032578-05 and is the answer not in the manual?
Questions and answers