Exporting All Interface & Static Routes To Ospf; Exporting All Rip, Interface & Static Routes To Ospf - Cabletron Systems SMARTSWITCH ROUTER 9032578-05 User's Reference Manual

ospf add interface 140.1.3.1 to-area 140.1.0.0
ospf add interface 130.1.1.1 to-area backbone
Exporting All Interface & Static Routes to OSPF
Router R1 has several static routes. We would export these static routes as type-2 OSPF
routes. The interface routes would be redistributed as type-1 OSPF routes.
1. Create a OSPF export destination for type-1 routes since we would like to redistribute
certain routes into OSPF as type 1 OSPF-ASE routes.
ip-router policy create ospf-export-destination ospfExpDstType1 type
2. Create a OSPF export destination for type-2 routes since we would like to redistribute
certain routes into OSPF as type 2 OSPF-ASE routes.
ip-router policy create ospf-export-destination ospfExpDstType2 type
3. Create a Static export source since we would like to export static routes.
ip-router policy create static-export-source statExpSrc
4. Create a Direct export source since we would like to export interface/direct routes.
ip-router policy create direct-export-source directExpSrc
5. Create the Export-Policy for redistributing all interface routes and static routes into
OSPF.
ip-router policy export destination ospfExpDstType1 source
ip-router policy export destination ospfExpDstType2 source
Exporting All RIP, Interface & Static Routes to OSPF
Note:
Also export interface, static, RIP, OSPF, and OSPF-ASE routes into RIP.
In the configuration shown in
interfaces of routers R1 and R2, which are attached to the sub-network 120.190.0.0/16.
We would like to redistribute these RIP routes as OSPF type-2 routes and associate the tag
100 with them. Router R1 would also like to redistribute its static routes as type 2 OSPF
routes. The interface routes are to be redistributed as type 1 OSPF routes.
SmartSwitch Router User Reference Manual
1 metric 1
2 metric 4
directExpSrc network all
statExpSrc network all
Figure 8 on page
Chapter 11: OSPF Configuration Guide
124, RIP Version 2 is configured on the
121