Optional Brick Panel Installation - Jøtul GF 400 DV IPI Sebago Installation And Operation Instructions Manual

139548-N GF 400 DV IPI 7/21
CAUTION!
THE BRICK PANELS ARE FRAGILE. SUPPORT
THE PANELS WITH BOTH HANDS AND HANDLE
WITH CARE.
1. Install the Lower Panel.
Position it up against the back wall, resting on the
burner skirt. Fig. 28.
2. Bend the retainer tab out slightly from each side of
the firebox. See fig. 29. Set one side panel in place and
bend the retainer tab down to secure the panel.
3. Set the Upper Panel on the Lower Panel. Hold it in place
while setting the opposite Side Panel against that wall.
Fig. 29.
4. Adjust the Upper Panel. You should seat the Upper
Panel down and forward so that no gaps are evident at
the panel joints.
Retainer Tab
Figure 29. Install the Upper and Side Panel.
19
Upper Panel
225004
4
Lower Panel
225003
Left Panel
225006
Figure 28. Panel kit components. Note lower ID
imprints on Brown Brick Side Panels.
3
1 2
Right Panel
225005