Wiring Diagram - Jøtul GF 400 DV IPI Sebago Installation And Operation Instructions Manual

139548-N GF 400 DV IPI 7/21
SIT Proflame 2 IFC

Wiring Diagram

Figure 67. GF 400 DV IPI Sebago with Proflame 2 Premium Remote Control Accessories
IFC Battery Replacement
A red LED on the IFC board indicates low battery power.
1. Switch Burner to OFF and disconnect power to the stove.
2. Access the battery box from behind the right side
of the control compartment. See figs. 40 and 69.
Disengage it from the hook & loop tape.
3. Install four, 1.5v AA batteries and return box to the
compartment.
4. Reconnect power to the stove.
32
CPI / IPI
Switch
Battery Pack
Four, 1.5v AA
Main IFC Harness
Optional
Variable Lamp
Optional
Variable Speed
Blower
Optional Proflame 2 Stepper Regulator
SIT Proflame 885 Valve
Burner Switch
SIT Proflame 2 IFC
Electrode
Flame Sensor
120VAC Power