System Components; Series 90; Series 90Hv; Series 90 System Controller - Cablescan 90 Series Setup Manual

Page 4

SERIES 90

The Series 90 consists of a system control and one to thirty-two expansion cabinets to
accommodate scanner boards. See Figure 4. There are two models: the Series 90-S9, with a
nine-board Expansion Cabinet (which may be ordered with 1 to 9 boards); the Series 90-S32,
with a thirty-two board Expansion Cabinet (which may be ordered with 1 to 32 boards).
Additional 9 and 32-board Expansion Cabinets can be added, in any combination, to either
model. They may be ordered with partial or full complements of scanner boards.

SERIES 90HV

The Series 90HV consists of the same system control and one to thirty-two expansion cabinets to
accommodate high-voltage scanner boards. There is only one model, the Series 90HV-S23, with
a 23-board expansion cabinet. It may be ordered with 1 to 23 high-voltage, 64-point scanner
boards. Additional 23-board expansion cabinets may house partial or full complements of
scanner boards.
Optional
Printer

SERIES 90 SYSTEM CONTROLLER

The Series 90/90HV system controller is based on an Intel processor. The controller contains a
hard disk drive and a DVD drive. Human interface with the controller is provided by a 101-key
keyboard, mouse, and a monitor. The controller communicates with the expansion cabinets
through its high-speed serial port. USB ports are provided to accommodate an optional printer.
Monitor
System
Controller
KBD/Mouse
Figure 4. Series 90/90HV Simplified Diagram

SYSTEM COMPONENTS

Expansion
Cabinet
Expansion
Cabinet
Expansion
Cabinet
Series 90 Setup Manual
Assembly
Under
Test