Series 90 Setup Manual
Page 19
5210917-03 Cable Assembly
The 5210917-03 cable assembly has a 64-pin socket connector (7200481) on one end and an
AMP Champ flat cable connector (5210446) on the second end. This cable can be used to
interface to a panel mountable discrete-wired type AMP Champ connector. The discrete-wired
connector can then be mounted on the test fixture and used to wire the mating connectors and
interfacing components on the fixture. See Figure 17, below.
7200481
7200446
Low voltage Cable Assembly – 5210917-03
Figure 17. Low-voltage Cable Assembly – 5210917-03
5210982 Cable Assembly
The 5210982 discrete-wired cable assembly (Figure 18) has a 64-pin AMP Champ IDC
connector (7200449) on the first end and unterminated on the second end. This connector can be
mounted on the interface fixture and used to wire the mating connectors.
7200449
5210982
Figure 18. Low- voltage Cable Assembly – 5210982
Note: