Rosslare HOME LOGIX HLX-24 Hardware Installation And Programming Manual page 44

Installer Menu
i.
ii.
iii. Press ESC to exit the submenu.
Ack Timeout – Specify the time that the system has to send a

report event before the report alert is discontinued.
i.
ii.
Signal Gain – Specify the strength of the DTMF.

i.
ii.
 Call Wait Cancel – Specify whether call waiting interferes in the
event transmission to the central station by dialing *70 and
entering the central station phone number. The default setting is
Disabled.
CS Secondary – Specify the secondary Central Station (see CS
c.
Primary above for detailed options and instructions).
CS Protocol – Specify the reporting protocol used by the system to
d.
report events to the central stations. Currently only Contact ID is
available.
Dialing Attempts – Specify the number of times the system
e.
attempts to dial the primary stations number before attempting to
dial the secondary number. The default is 3 attempts.
i. Using the numeric keypad, enter the dialing attempts value
between 1 and 15.
ii. Press Enter to save.
44
Using Menu, choose the reporting options for each group
as desired. The options are Disable and Enable. The available
reporting groups are:
 Alarms
Troubles

 Alerts
 Bypass
 Arm/disarm
 Restore
Press Enter to confirm.
Using the alphanumeric keypad, set the value of the Ack
timeout to a value of 10 to 60.
Press Enter to confirm.
Using the alphanumeric keypad, set the value of the signal
gain to a value of between 300 and 1200.
Press Enter to confirm.
HLX-24 Hardware Installation and Programming Manual