Installer Menu - Rosslare HOME LOGIX HLX-24 Hardware Installation And Programming Manual

Installer Menu

6. Installer Menu
The Installer menu enables access to the following group of options:
 Change Code
 Zones
Enrolling

 Security
 Communications
 Automation
Messages

 Maintenance
Appendix A presents some the features available in the Installer menu and how
to access them.
To access the Installer menu:
Press Menu twice to reach the
1.
The default Installer code is 8888.
If a wrong code is entered, the system indicates that an illegal code was
entered and waits once again for the correct code to be entered. After 30
seconds of no entry, the system returns to Normal mode automatically.
The system locks out for 90 seconds after entering 5 wrong codes.
No activity within the menu for 4 minutes causes the system to return to
Normal mode. To return to Normal mode before 4 minutes pass, press
ESC.
INSTALLER MENU
2. Once in the
Press Enter to access the desired submenu as detailed below.
3.
Some menus can be accessed directly by typing the option number instead of
scrolling the various options.
24
INSTALLER MENU
, use Menu to browse the submenus.
HLX-24 Hardware Installation and Programming Manual
option and press Enter.