Mitsubishi MELSEC-F FX2N-64CL-M User Manual page 45

FX2N-64CL-M CC-Link/LT Master Block
• When the VCTF cable/high flexible cable is used as the trunk line
Cut at the root of the tip of
the cover with nippers, etc.,
and remove the tip.
After striping the sheath by 70mm (2.75") or more, perform the procedure for the
dedicated flat cable in the same way as the T-branch.
Connection of Cables, Connectors and Terminating Resistors 6
Set the cover to the position
in which T-branch will be.
Cut off here.
VCTF cable/ VCTF cable/
High flexible cable High flexible cable
connector connector
Trunk line, Drop line: VCTF cable, High flexible cable
VCTF cable/High flexible cable
(trunk line)
VCTF cable/
High flexible cable
(drop line)
Execute press-fitting in the
same way as steps and
of the attachment procedure.
22.5mm
(0.88")
6-7