Mitsubishi MELSEC-F FX2N-64CL-M User Manual page 35

FX2N-64CL-M CC-Link/LT Master Block
2) When the VCTF cable is used as the trunk line
Master
block
*1
*3
adapter
General -
power supply
(24V DC)
*0
*1 For the processing procedure of the VCTF cable connector (for connecting the terminal
resistor), refer to "6.4 How to attach connectors used for VCTF cable/high flexible cable".
*2 For the processing procedure of the dedicated flat cable connector (for connecting the
terminal resistor), refer to "6.3 How to attach connectors used for dedicated flat cable".
*3 The dedicated power supply is also available.
Terminal resistor connection method on master block side
Terminating resister (CL9-TERM)
VCTF cable
connector
(for connecting master (for connecting terminal
block) resistor)
*1
Remote
I/O station
Power
*1
Remote
I/O station
purpose
Trunk line (VCTF cable)
Drop line (Dedicated flat cable)
Drop line (VCTF/High flexible cable)
Mounting
*1
VCTF cable
connector
VCTF cable
*2
*1
Remote
I/O station
*1
Remote
I/O station
*1
Remote
I/O station
VCTF/High flexible cable connector
Dedicated flat cable connector
Terminating resister (CL9-TERM)
System Configuration 4
*2
Remote
I/O station
Unit having
cable
Remote
I/O station
*2
Remote
I/O station
Commercial terminal
*1
block
*2
*1
*1
200mm
(7.87")
or less
4-9