Ip Configuration - Planet POE-2400G User Manual

Object
• Gateway
• Description
• System Date
• System UpTime
Table 4-3-1 Descriptions of the System Information Web page screen Objects

4.3.2 IP Configuration

This section provides the IP Configuration of PoE Injector Hub, the screen in
describes the IP Configuration object of PoE Injector Hub.
Object
• DHCP Client
• IP Address
• Subnet Mask
• Default Gateway
• Description
• Apply
• Reset
Table 4-3-2 Descriptions of the IP Configuration Web page screen Objects
If PoE Injector Hub didn't receive IP address from DHCP server then user still can connect to the IP address
before change to DHCP client mode, or user can use Smart Discovery Utility to find out what is IP address
set in the PoE Injector Hub currently.
Description
Displays the current gateway address of PoE Injector Hub.
Display the system description of PoE Injector Hub.
Display the current system date of PoE Injector Hub.
Display that when the system started up.
Figure 4-3-2 IP Configuration Web page screen
Description
Allow disable or enable the DHCP Client function of PoE Injector Hub.
Allow input new IP Address of PoE Injector Hub.
Allow input new Subnet Mask Address of PoE Injector Hub.
Allow input new Default Gateway Address of PoE Injector Hub.
Allow input new system description of PoE Injector Hub, the maximum length is
20 characters.
Press this button to take effect.
Press this button for resets not apply IP Configuration to default mode.
23
User's Manual of POE-1200G / POE2400G
Figure 4-3-2 appears and Table 4-3-2