Table of Contents
Advertisement
3.1 Connect To PC
RS-232 serial cable
Prepare a RS-232 serial cable. Attach the 9-pin female connector to the male connector
on the switch. Plug the other side of this cable to your PC.
Hyper Terminal
In Windows 95/98/2000/XP, launch "HyperTerminal", create a new connection, and
adjust settings as below:
3.2 Main Menu
Power on the switch; launch the new terminal program you just set up. Press "Enter" key,
then login screen appears as below. Enter username and password to access
GSW-1402S.
There are three system default accounts for different privilege levels:
"root":
root can do any configuration includes changing password and enable/disable
management capability via console port. The default password of root is
"superuser". Note that this account is not workable on telnet and web
management interface.
"admin"
admin can do any configuration except changing password. The default
password of admin is "admin".
"guest": guest can view the whole switch information only, moreover, access to Web
management interface is not allowed. The default password is "guest".
Chapter 3 Console management
5
Advertisement
Table of Contents
