Electronic Attitude Director Indicator (Eadi); Typical Eadi Display - Honeywell SPZ-8000 Pilot's Manual

SPZ--8000 Digital Integrated Flight Control System
Pilot's IAS/MACH Knob and PUSH CHG Button -- The
D
IAS/MACH knob is used to set the IAS or MACH reference speed
(displayed on the EADI) for the flight director flight level change
(FLC) mode. The power--up value for selected speed is 80 kts IAS.
Pushing the PUSH CHG button toggles the display between IAS
and MACH. The power--up display is IAS.
Copilot's ALT SEL (Altitude Select) Knob -- The ALT SEL knob
D
is used to set the preselect altitude displayed on the EADI. The
altitude is set in 100--foot increments.
TCAS Display Select Switch (Optional) -- When this switch is
D
pushed, the EHSI display is replaced with a combination EHSI arc
and TCAS traffic display.

ELECTRONIC ATTITUDE DIRECTOR INDICATOR (EADI)

The electronic attitude director indicator (EADI), shown in Figure 4--4,
combines the true sphere--type attitude display with lateral and vertical
computed steering signals to display the commands required to
intercept and maintain a desired flightpath.
Figure 4--5 shows a typical EADI display format.
Electronic Flight Instrument System (EFIS)
4-6

Typical EADI Display

Figure 4--4
AD--58109@
A28--1146--055
REV 2