Mfd Map Mode; Mfd Map Mode Display (Example) - Honeywell SPZ-8000 Pilot's Manual

SPZ--8000 Digital Integrated Flight Control System

MFD MAP Mode

The MAP mode, shown in Figure 5--3, expands the EHSI map by
increasing the maximum range beyond the normal radar ranges, and
uses all the data available from selectable navigation sources.
The MAP mode is selected with the MFD controller MAP/PLAN button
and is always oriented to the aircraft heading with the aircraft position
at lower center and the MAP route moving toward the aircraft.
When coupled to a compatible FMS, the NAV route with up to four
waypoints can be displayed to a range limit of 300, 600, or 1200 miles,
or the next route segment can be displayed. With a compatible NAV
source with a stored data base (i.e., the Honeywell FMS), other
navigation data beyond route mapping such as VOR station locations
and time--to--go to the next waypoint, can be displayed. A movable
designator aids in relocating the next waypoint.
When weather returns are selected, the range is slaved to the weather
radar controller.
Multifunction Display (MFD) System
5-8
SRP

MFD MAP Mode Display (Example)

Figure 5--3
AD--58089@
A28--1146--055
REV 2