Electronic Display Controls; Display Controller - Honeywell SPZ-8000 Pilot's Manual

SPZ--8000 Digital Integrated Flight Control System

ELECTRONIC DISPLAY CONTROLS

Display Controller

The display controller, shown in Figure 4--2, controls the EFIS display
format.
The display controller functions are described in the following
paragraphs.
FULL/ARC Button -- The FULL/ARC button changes the EHSI
D
display from full--compass to partial--compass format. In the
full--compass mode, 360 of heading are displayed. In the
partial--compass mode, 90 of heading are displayed. Pushing the
FULL/ARC button toggles the display between the full compass and
partial compass.
MAP Button -- Pushing the MAP button changes the full compass
D
display to the partial compass format with one waypoint displayed
for each bearing pointer and VOR/DME (distance measuring
equipment) ground station position. The information is only
displayed if it is within the range selected. In the WX mode, pushing
the MAP button selects the map format with weather radar
information.
WX (Weather Radar) Button -- Pushing the WX button displays
D
weather radar returns on the EHSI partial compass display. If the
EHSI is in the full compass map mode, pushing the WX button
changes the display to the partial compass mode and displays
weather radar returns from the weather radar or a weather test
pattern. If the map mode is displayed, pushing the WX button once
displays weather radar information over the map information.
Pushing the WX button a second time removes the weather
information.
Electronic Flight Instrument System (EFIS)
4-2

Display Controller

Figure 4--2
AD--58055@
A28--1146--055
REV 2